Máy cày ISEKI TJA8100

Hỗ trợ trực tuyến
Tư vấn - Hà Nội - 0988.866.196

Khánh Ngân

  

icon email icon tel

0388330368

Hương Huệ

  chat qua skype

icon email icon tel

0988 866 196

Mã: Máy cày ISEKI TJA8100

Bảo hành: 12 tháng
0
Chú ý: Giá bán niêm yết trên Website là giá phải tính thuế VAT. Kính mong quý khách lấy hóa đơn đỏ khi mua hàng để tuân thủ đúng quy định của pháp luật.









 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L
 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine
 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space
 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 





 

 

 

 



 

 

Hyd. Shuttle lever
 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 



 

 

HIGH-LOW change for TJA8100 and TJA8090
 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 



 

 

PTO engagement
 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 



 

 



 

 

Speed signal connector
 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 



 

 

Convenient function
 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 



 

 

Full open bonnet
 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.








may cay iseki tja8100 hinh 0

may cay iseki tja8100 hinh 1

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

 

 

may cay iseki tja8100 hinh 0

may cay iseki tja8100 hinh 1

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

 

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

 

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

 

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

 

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

 

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

may cay iseki tja8100 hinh 0

may cay iseki tja8100 hinh 1

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

may cay iseki tja8100 hinh 0

may cay iseki tja8100 hinh 1

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

may cay iseki tja8100 hinh 0

may cay iseki tja8100 hinh 1

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

may cay iseki tja8100 hinh 0

may cay iseki tja8100 hinh 1

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

may cay iseki tja8100 hinh 0

may cay iseki tja8100 hinh 1

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

may cay iseki tja8100 hinh 0

may cay iseki tja8100 hinh 1

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

may cay iseki tja8100 hinh 0

may cay iseki tja8100 hinh 1

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.

may cay iseki tja8100 hinh 0

may cay iseki tja8100 hinh 1

 

 

 

TJA8100 TJA8090 TJA8080
Output(Max.) 102PS 96.5PS 85.7PS
Displacement 3298cc 3298cc 3298cc
MaxTorque 410Nm 387Nm 346Nm
FuelTankCapacity 105L 105L 105L

 

 

ISEKI is pleased to introduce the TJA series tractor range. Three models comprise the range with maximum engine output from 85.7 to 102ps making them versatile, multi-purpose tractors capable of tackling multiple jobs all the year round in farms and municipalities.

Available in both cabin and ROPS configurations, TJA series utility tractor offers reliability, flexibility, and strong build quality.

 

 

 

 

 

Powerful & Eco-friendly New Engine

 

The all new three cylinder engines mounted on the TJA Series utility tractor meet Stage 3B emissions standards.

These engines have following notable features in terms of environmental conservation.

EGR (Exhaust Gas Recirculation)- To reduce Nox- To reduce throttling losses on spark ignition engines at part load- To improve engine life through reduced cylinder temperatures (particularly exhaust valve life)

DOC(Diesel Oxidation Catalyst)
- To oxidize particles, hydrocarbons and cabin monoxide from exhaust gases.

 

 

 

Ergonomic operator's space

 

 

Whether choosing an open station or cabin, the operator will experience the comfort of a completely flat floor with rubber cover for comfortable foot placement and plenty of room.
Most of levers are located on the right side ergonomically.

 

 

may cay iseki tja8100 hinh 2

may cay iseki tja8100 hinh 3

 

 

 

 

may cay iseki tja8100 hinh 4

 

 

Hyd. Shuttle lever

 

The hydraulic shuttle lever is conveniently located on the left side of the column within reach of hand. An electronically controlled wet-clutch allows the operator to change the direction of travel by a simple shift of the lever. No foot clutch is required when shutting and this hydraulic shuttle lever equips safety guard for avoiding misoperation as standard.

 

 

 

 

may cay iseki tja8100 hinh 5

 

 

HIGH-LOW change for TJA8100 and TJA8090

 

HIGH-LOW change button provides 2 speeds of clutch-less change over all gears.
If the button is pushed on, traveling speed increases. At that time, “H” symbol illuminates on instrument panel. And if the button is pushed off, traveling speed decreases.

HIGH-LOW select mode is only available for specific model of TJA8100 and TJA8090. Thanks to this function, 36-speed is selectable in both forward and reverse traveling.

HIGH-LOW change is quite helpful for following works.
-Towing trailer on slope
-Snow removal with snow blade
-Front loader operation e.t.c.

 

 

 

may cay iseki tja8100 hinh 6

 

 

PTO engagement

 

Rear PTO selector lever can choose either 750 rpm (540E) position or 540 rpm position.

Pressure rising curve of PTO clutch engagement can be selected at 3 modes (Standard mode, Soft 1 mode, Soft 2 mode). This function contributes to absorbing the shock when engaging PTO by selecting the best mode, depending on attaching implements.

 

may cay iseki tja8100 hinh 7

 

 

may cay iseki tja8100 hinh 8

 

 

Speed signal connector

 

ISO11786 connector (7 pins) is fitted on the right hand cover for easier connecting of implements which require speed signal output such as salt spreader or sprayer.

 

 

 

may cay iseki tja8100 hinh 9

 

 

Convenient function

 

By turning the 4WD selectable dial, you can choose either 4WD or 2WD mode and other convenient mode as follows.

SUPER FULL TURN mode:
The front wheels rotate quickly when turning the steering wheel so that the tractor can turn more quickly.

2WD TURN mode:
The front axle is disengaged only when turning the steering wheel, so that it can reduce the damage of lawn.

The TJA series tractor has the function of "4 WHEEL BRAKE". When brake pedal is depressed, 4WD is automatically engaged to divide the braking force equally among 4 wheels.

 

 

 

may cay iseki tja8100 hinh 10

 

 

Full open bonnet

 

Easy engine access thanks to fully open bonnet enables you to make the daily maintenance easier.
Every part for maintenance is accessible very easily.